TEPA 515 cable pushing device is fastened to the working axle of TEPA 500 general purpose winch or TEPA 505 winch. The cable pushing device could be used for assisting the winch in cable pulling, when the pulling force is not enough. In this case the other winch is pulling and the other one is pushing the cable simultaneously. When pushing cables over 25 mm of diameter the pushing roller is equipped with metal pressing rollers. When pushing cables less than 25 mm of diameter the pushing roller is equipped with rubber pressing roller. It is easy to change the pressing rollers; just loosen or tighten the wing nuts.

Features:

• Pushing force about 300 kg, depending on the operating machine
• Pushing speed 3-35 m/min depending on the cable and the operating machine
• Diameter of the cable 5-80 mm