Post for use together with Vepe installation components or directly in the sleeve embedded in the element.

Applications:

• Roof edges, no adjustment range
• Vemo installation on wall elements, top beams or girders
• Note! Vemo anchors can be installed in elements already during casting at the element factory. Ensure correct dimensioning.
• T‑bolt installation in element joints
• Guardrails do not obstruct roofing work

Technical specifications:

• Protective height approx. 1.40 m
• Weight of guardrail post and base part: 10.5 kg
• Base part attachment via Vemo anchors and bolt or T‑bolt L = 150 mm … 300 mm
• Recommended spacing between posts approx. 2.0 m when using a handrail of 50 × 100 mm²
• Recommended intermediate rail: 50 × 100 mm²
• Recommended toe board: 22 × 150 mm²

Installation and operating instructions:

• Check the condition of the guardrail post and base part
• Do not use damaged components
• Secure the base part firmly to the Vemo anchors or, in T‑bolt installation, into the element joint
• In T‑bolt installation, the base part is fixed in the element joint by turning the T‑bolt head horizontally between the outer shell and insulation of the façade element
• Ensure the T‑bolt head remains horizontal after tightening
• Install the guardrail posts
• Install the handrail and intermediate rails and check the condition of the timber
• Tighten the wedge locks firmly by hammering
• Install the toe board
• Inspect the guardrail structure before commissioning
• Guardrail posts can be removed during element joint sealing